Bretfords pre-assembled laptop storage cart
stores and charges up to 18 computers. All steel
construction with multiple-point locking doors
and padlock deters theft and helps ensures the
security of equipment. Finished in Grey Mist
powder paint. Includes two overload
protected UL-Listed, nine-outlet electrical
units which can be installed or specified
inside the front or rear of the cart. Electrical
units have on/off switches. Available with 5" or 8" casters, two rigid and two swivel with locking brakes.
LAP18 Storage Cart Electrical Note:
Due to electrical limitations,
each electrical unit must be plugged into
separate circuits and not just separate
outlets, or specify a timer to assist with
charging notebooks. Timer (LAPTMR) is included in the UL Listed version of the cart.
FEATURES
Welded and fully assembled at the factory, simply uncrate and use.
Overall dimensions 36.5"W x 24"D x 43 13/16"H.
Compartments: 14 11/16"W x 17"D x 3"H.
Doors, rear and side panels are perforated to
allow the ventilation of equipment when charging.
Top shelf comes with a non-slip rubber mat and features two grommet holes at the back for cord management and access to electrical units.
Laptops lay flat, not on their side, when storing and charging.
Electrical units can be ordered installed inside the front or the back of the cart.
Optional automatic timer/charger unit -LAPTMR- available providing ability to charge all laptops using one circuit. Timer is included in the UL Listed version of the cart.
In either case, the timer is installed inside the rear of the cart with access through cut outs in the back panel.
Also includes an additional three-outlet electrical unit that attaches to the back for power equipment.
Rear grommet holes and cord winders on the back panel allow the extra electrical power cord to be neatly wound up out of the way when
moving the cart from one place to another.
Built in handles aid in moving the cart.
Standard 5" casters provide easy mobility over carpet.
Optional 8" soft rubber casters for transporting over rough surfaces or between buildings.
LAPTMR Optional Timer Features:
UL states that the maximum amount of notebooks that can be charged at the same time from one circuit is 15. That is why the LAP18, LAP24 and LAP30 require two charging units. UL recommends that each electrical unit be plugged into a separate electrical circuit when charging. The Automatic Timer allows both charging units to be plugged into the timer. The timer switches the electrical current from one charging unit to the other, therefore charging all of the notebooks from one circuit (one plug). Timer is resettable and ships standard with a four-hour charging period per electrical unit - 8 hour charging time for all notebooks. UL-Listed with a 7' cord.
Doing Business Since 1969